JustMakeWeb.com รับทำเว็บไซต์ รับทำเว็บโรงแรม รับทำเว็บขายของ รับทำเว็บบริษัท เว็บสำเร็จรูป รับทำเว็บร้านค้า ออกแบบเว็บไซต์ ใช้งานได้ง่าย รองรับ SEO โปรโมท GOOGLE ให้ติดอันดับได้อย่างรวดเร็ว , ลงโฆษณาฟรี VPS ราคาถูก
รับทำเว็บไซต์
0
ผลิตภัณฑ์
ผลงานติดตั้งไฟฟ้า

Omron CP1L

มีผู้ชม 3412 ครั้ง
PLC Omron ( CP1L )
PLC Omron

PLC Omron CP1L จำหน่าย PLC Omron CP Series ทุกรุ่น
พีแอลซี ออมรอน รับประกันคุณภาพ ,PLC Omron CP1L เป็นPLC Omron High Performing

หรือ PLC ในรุ่นสูงของOmron รับประกันคุณภาพ PLC Omron ทุกรุ่น จากโรบัสท์ โซลูชั่น
รับประกันคุณภาพ และมีวิศวกรคอยซัพพอร์ทให้คำปรึกษา ด้านระบบPLC Omron รวมถึงการ
เขึยนโปรแกรมPLC Omron
                   PLC Omron CP1L
                                                           "High Performing Programmable Contoller with Embedded Ethrnet"

"CP1L-EM" and "CP1L-EL" have an embedded Ethernet port. "CP1L-M" and "CP1L-L" have a built-in peripheral USB port.
Function blocks (FB) allow complex programming units to be reused easily.


Automation Systems Programmable Contollers CP1L
Features
PLC Omron "CP1L-EM" , "CP1L-EL" have complete with a Ethernet port.
Pulse output for two axes. Advanced power for high-precision positioning control.
High speed Counters. Single phase for four axes.
Six interrupt inputs are built in. Faster processing of instructions speeds up the entire system.
Serial Communications. Two ports. Select Option Boards for eithe RS-232C or RS 485 communications.
"CP1L-M" and "CP1L-L" have a peripheral USB port.
The Structured Text (ST) Language. Makes math operations even easier.
Can be used for the CP1W series Unit. The extendibility of it is preeminently good.
LCD displays and settings. Enabled using Option Board.

PLC Omron CP1L
Type AC power supply models DC power supply models
Model CP1L-[][][]-A CP1L-[][][]-D
Power supply 100 to 240 VAC 50/60 Hz 24 VDC
Operating voltage 
range
85 to 264 VAC 20.4 to 26.4 VDC
Power consumption 50 VA max. (CP1L-M60/-M40/-M30[][]-A) 
30 VA max. (CP1L-L20/-L14/-L10[][]-A)
20 W max. (CP1L-EM40/-EM30/-M60/-M40/ 
-M30[][]-D) 
13 W max. (CP1L-EL20/-L20/-L14/ 
-L10[][]-D)
Inrush current * 100 to 120 VAC inputs: 
20 A max. (for cold start at room 
temperature) 
8 ms max. 
200 to 240 VAC inputs: 
40 A max. (for cold start at room 
temperature), 
8 ms max.
30 A max. (for cold start at room 
temperature) 
20 ms max.
External power supply 300 mA at 24 VDC (CP1L-M60/-M40/ 
-M30[][]-A) 
200 mA at 24 VDC (CP1L-L20/-L14/ 
-L10[][]-A)
None
Insulation resistance 20 MΩ min. (at 500 VDC) between the 
external AC terminals and GR terminals
No insulation between primary and secondary 
for DC power supply
Dielectric strength 2,300 VAC at 50/60 Hz for 1 min between 
the external AC and GR terminals, leakage 
current: 5 mA max.
No insulation between primary and secondary 
for DC power supply
Noise immunity Conforms to IEC 61000-4-4. 2 kV (power supply line)
Vibration resistance CP1L-L/M: 
Conforms to JIS C60068-2-6. 10 to 57 Hz, 0.075-mm amplitude, 57 to 150 Hz, acceleration: 
9.8 m/s2 in X, Y, and Z directions for 80 minutes each. Sweep time: 8 minutes × 10 sweeps 
= total time of 80 minutes) 
CP1L-EL/EM: 
5 to 8.4 Hz, 3.5 mm amplitude, 8.4 to 150 Hz, acceleration: 9.8 m/s2 in X, Y, and Z directions 
for 100 minutes each (time coefficient of 10 minutes × coefficient factor of 10 = total time 
of 100 minutes)
Shock resistance Conforms to JIS C60068-2-27. 147 m/s2 three times each in X, Y, and Z directions
Ambient operating 
temperature
0 to 55°C
Ambient humidity 10% to 90% (with no condensation)
Ambient operating 
environment
No corrosive gas
Ambient storage 
temperature
-20 to 75°C (Excluding battery.)
Power holding time 10 ms min. 2 ms min.
 
Performance Specifications
PLC Omron CP1L CPU Unit (EM/EL Type)
Type CP1L-EM40 (40 points) CP1L-EM30 (30 points) CP1L-EL20 (20 points)
Models CP1L-EM40D[]-[] CP1L-EM30D[]-[] CP1L-EL20D[]-[]
Control method Stored program method
I/O control method Cyclic scan with immediate refreshing
Program language Ladder diagram
Function blocks Maximum number of function block definitions: 128 Maximum number of instances: 256 
Languages usable in function block definitions: Ladder diagrams, structured text (ST)
Instruction length 1 to 7 steps per instruction
Instructions Approx. 500 (function codes: 3 digits)
Instruction execution time Basic instructions: 0.55 μs min. Special instructions: 4.1 μs min.
Common processing time 0.4ms
Program capacity 10K steps 5K steps
  FB program 
memory
10K steps
Number of tasks 288 (32 cyclic tasks and 256 interrupt tasks)
  Scheduled 
interrupt tasks
1 (interrupt task No. 2, fixed)
Input interrupt 
tasks
6 (interrupt task No. 140 to 145, fixed)
(High-speed counter interrupts and interrupt tasks specified by external interrupts can 
also be executed.)
Maximum subroutine 
number
256
Maximum jump number 256
I/O 
areas
Input Area 1,600 bits (100 words) CIO 0 to CIO 99
  Built-in Input 
Area
24 bits: CIO 0.00 to CIO 
0.11 and CIO 1.00 to CIO 
1.11
18 bits: CIO 0.00 to CIO 
0.11 and CIO 1.00 to CIO 
1.05
12 bits: CIO 0.00 to CIO 0.11
Output Area 1,600 bits (100 words) CIO 100 to CIO 199
  Built-in Output 
Area
16 bits: CIO 100.00 to CIO 
100.07 and CIO 101.00 to 
CIO 101.07
12 bits: CIO 100.00 to CIO 
100.07 and CIO 101.00 to 
CIO 101.03
8 bits: CIO 100.00 to CIO 
100.07
1:1 Link Area 256 bits (16 words): CIO 3000.00 to CIO 3015.15 (CIO 3000 to CIO 3015)
Serial PLC Link 
Area
1,440 bits (90 words): CIO 3100.00 to CIO 3189.15 (CIO 3100 to CIO 3189)
Work bits 4,800 bits (300 words): CIO 1200.00 to CIO 1499.15 (words CIO 1200 to CIO 1499) 
6,400 bits (400 words): CIO 1500.00 to CIO 1899.15 (words CIO 1500 to CIO 1899) 
15,360 bits (960 words): CIO 2000.00 to CIO 2959.15 (words CIO 2000 to CIO 2959) 
9,600 bits (600 words): CIO 3200.00 to CIO 3799.15 (words CIO 3200 to CIO 3799) 
37,504 bits (2,344 words): CIO 3800.00 to CIO 6143.15 (words CIO 3800 to CIO 6143)
TR Area 16 bits: TR0 to TR15
Holding Area 8,192 bits (512 words): H0.00 to H511.15 (H0 to H511)
AR Area Read-only (Write-prohibited): 7168 bits (448 words): A0.00 to A447.15 (A0 to A447) 
Read/Write: 8192 bits (512 words): A448.00 to A959.15 (A448 to A959)
Timers 4,096 timer numbers: T0 to T4095
Counters 4,096 counter numbers: C0 to C4095
DM Area 32 Kwords: D0 to D32767 10 Kwords: D0 to D9999, 
D32000 to D32767
Data Register Area 16 registers (16 bits): DR0 to DR15
Index Register Area 16 registers (32 bits): IR0 to IR15
Task Flag Area 32 flags (32 bits): TK0000 to TK0031
Trace Memory 4,000 words (500 samples for the trace data maximum of 31 bits and 6 words.)
Memory Cassette A special Memory Cassette (CP1W-ME05M) can be mounted. 
Note: Can be used for program backups and auto-booting.
Clock function Supported. Accuracy (monthly deviation): -4.5 min to -0.5 min (ambient temperature: 
55°C), 
-2.0 min to +2.0 min (ambient temperature: 25°C), -2.5 min to +1.5 min (ambient 
temperature: 0°C)
Communications functions Built-in Ethernet Port (Connecting Support Software, Message Communications, 
Socket Service)
A maximum of two Serial Communications Option 
Boards can be mounted.
A maximum of one Serial 
Communications Option 
Board can be mounted.
Memory backup Flash memory: User programs, parameters (such as the PLC Setup), comment data, 
and the entire DM Area can be saved to flash memory as initial values. 
Battery backup: The Holding Area, DM Area, and counter values (flags, PV) are backed 
up by a battery.
Battery service life Service life expectancy is 5 years at 25°C, less at higher temperatures. (From 0.75 
to 5 years depending on model, power supply rate, and ambient temperature.)
Built-in input terminals 40 (24 inputs, 16 outputs) 30 (18 inputs, 12 outputs) 20 (12 inputs, 8 outputs)
Number of connectable 
Expansion Units and 
Expansion I/O Units
CP-series Expansion Unit and Expansion I/O Units: 
3 max.
CP-series Expansion Units 
and Expansion I/O Units: 
1 max.
Max. number of I/O points 160 (40 built in + 40 per 
Expansion (I/O) Unit x 3 
Units)
150 (30 built in + 40 per 
Expansion (I/O) Unit x 3 
Units)
60 (20 built in + 40 per 
Expansion (I/O) Unit x 1 
Unit)
Interrupt inputs 6 inputs (Response time: 0.3 ms)
Interrupt inputs counter 
mode
6 inputs (Response frequency: 5 kHz max. for all interrupt inputs), 16 bits Up or down 
counters
Quick-response inputs 6 points (Min. input pulse width: 50 μs max.)
Scheduled interrupts 1
High-speed counters 4 inputs/2 axes (24 VDC) 
Differential phases (4x), 50 kHz 
Single-phase (pulse plus direction, up/down, increment), 100 kHz 
Value range: 32 bits, Linear mode or ring mode 
Interrupts: Target value comparison or range comparison
Pulse 
outputs 
(models 
with 
transistor 
outputs 
only)
Pulse outputs Trapezoidal or S-curve acceleration and deceleration (Duty ratio: 50% fixed) 
2 outputs, 1 Hz to 100 kHz (CCW/CW or pulse plus direction)
PWM outputs Duty ratio: 0.0% to 100.0% (specified in increments of 0.1% or 1%) 
2 outputs, 0.1 to 6553.5 Hz or 1 to 32,800 Hz 
(Accuracy: +1%/0% at 0.1 Hz to 10,000 Hz and +5%/0% at 10,000 Hz to 32,800 Hz)
Analog input 2 input (Resolution: 1/1000, Input range: 0 to 10 V). Not isolated.
CP1L CPU Unit (M/L Type)
Type CP1L-M60 
(60 points)
CP1L-M40 
(40 points)
CP1L-M30 
(30 points)
CP1L-L20 
(20 points)
CP1L-L14 
(14 points)
CP1L-L10 
(10 points)
Models CP1L- 
M60[][]-[]
CP1L- 
M40[][]-[]
CP1L- 
M30[][]-[]
CP1L- 
L20[][]-[]
CP1L- 
L14[][]-[]
CP1L- 
L10[][]-[]
Control method Stored program method
I/O control method Cyclic scan with immediate refreshing
Program language Ladder diagram
Function blocks Maximum number of function block definitions: 128 Maximum number of instances: 256 
Languages usable in function block definitions: Ladder diagrams, structured text (ST)
Instruction length 1 to 7 steps per instruction
Instructions Approx. 500 (function codes: 3 digits)
Instruction execution 
time
Basic instructions: 0.55 μs min. Special instructions: 4.1 μs min.
Common processing 
time
0.4 ms
Program capacity 10K steps 5K steps
Number of tasks 288 (32 cyclic tasks and 256 interrupt tasks)
  Scheduled 
interrupt 
tasks
1 (interrupt task No. 2, fixed)
Input 
interrupt 
tasks
6 (interrupt task No. 140 to 145, fixed) 4 (interrupt 
task No. 140 
to 143, fixed)
2 (interrupt 
task No. 140 
to 141, fixed)
(Interrupt tasks can also be specified and executed for high-speed counter interrupts and 
executed.)
Maximum subroutine 
number
256
Maximum jump number 256
I/O 
areas
Input Area 1,600 bits (100 words) CIO 0 to CIO 99
  Built-in 
Input Area
36 bits: CIO 
0.00 to CIO 
0.11 and CIO 
1.00 to CIO 
1.11 and CIO 
2.00 to CIO 
2.11
24 bits: CIO 
0.00 to CIO 
0.11 and CIO 
1.00 to CIO 
1.11
18 bits: CIO 
0.00 to CIO 
0.11 and CIO 
1.00 to CIO 
1.05
12 bits: CIO 
0.00 to CIO 
0.11
8 bits: CIO 
0.00 to CIO 
0.07
6 bits: CIO 
0.00 to CIO 
0.05
Output Area 1,600 bits (100 words) CIO 100 to CIO 199
  Built-in 
Output 
Area
24 bits: CIO 
100.00 to CIO
100.07 and 
CIO 101.00 to
CIO 101.07 
and CIO 
102.00 to CIO
102.07
16 bits: CIO 
100.00 to CIO
100.07 and 
CIO 101.00 to
CIO 101.07
12 bits: CIO 
100.00 to CIO
100.07 and 
CIO 101.00 to
CIO 100.03
8 bits: CIO 
100.00 to 
CIO 100.07
6 bits: CIO 
100.00 to 
CIO 100.05
4 bits: CIO 
100.00 to 
CIO 100.03
1:1 Link 
Area
1,024 bits (64 words): CIO 3000.00 to CIO 3063.15 (CIO 3000 to CIO 3063)
Serial PLC 
Link Area
1,440 bits (90 words): CIO 3100.00 to CIO 3189.15 (CIO 3100 to CIO 3189)
Work bits 8,192 bits (512 words): W000.00 to W511.15 (W0 to W511) 
CIO Area: 37,504 bits (2,344 words): CIO 3800.00 to CIO 6143.15 (CIO 3800 to CIO 6143)
TR Area 16 bits: TR0 to TR15
Holding Area 8,192 bits (512 words): H0.00 to H511.15 (H0 to H511)
AR Area Read-only (Write-prohibited): 7168 bits (448 words): A0.00 to A447.15 (A0 to A447) 
Read/Write: 8192 bits (512 words): A448.00 to A959.15 (A448 to A959)
Timers 4,096 timer numbers: T0 to T4095
Counters 4,096 counter numbers: C0 to C4095
DM Area 32 Kwords: D0 to D32767 10 Kwords: D0 to D9999, D32000 to 
D32767
Data Register Area 16 registers (16 bits): DR0 to DR15
Index Register Area 16 registers (32 bits): IR0 to IR15
Task Flag Area 32 flags (32 bits): TK0000 to TK0031
Trace Memory 4,000 words (500 samples for the trace data maximum of 31 bits and 6 words.)
Memory Cassette A special Memory Cassette (CP1W-ME05M) can be mounted. Note: Can be used for program 
backups and auto-booting.
Clock function Supported. Accuracy (monthly deviation): -4.5 min to -0.5 min (ambient temperature: 55°C), 
-2.0 min to +2.0 min (ambient temperature: 25°C), 
-2.5 min to +1.5 min (ambient temperature: 0°C)
Communications 
functions
One built-in peripheral port (USB 1.1): For connecting Support Software only.
A maximum of two Serial Communications 
Option Boards can be mounted.
A maximum of one Serial 
Communications Option 
Board can be mounted.
Not 
supported.
A maximum of two Ethernet Option Board 
can be mounted. 
When using CP1W-CIF41 Ver.1.0, one 
Ethernet Option Board can be mounted.
A maximum of one 
Ethernet Option Board 
can be mounted.
Not 
supported.
Memory backup Flash memory: User programs, parameters (such as the PLC Setup), comment data, and the 
entire DM Area can be saved to flash memory as initial values. 
Battery backup: The Holding Area, DM Area, and counter values (flags, PV) are backed up by a 
battery.
Battery service life Service life expectancy is 5 years at 25°C, less at higher temperatures. (From 0.75 to 5 years 
depending on model, power supply rate, and ambient temperature.)
Built-in input 
terminals
60 (36 
inputs, 
24 outputs)
40 (24 
inputs, 
16 outputs)
30 (18 
inputs, 
12 outputs)
20 (12 
inputs, 
8 outputs)
14 (8 
inputs, 
6 outputs)
10 (6 
inputs, 
4 outputs)
Number of 
connectable 
Expansion Units and 
Expansion I/O Units
CP-series Expansion Unit and Expansion 
I/O Units: 3 max.
CP-series Expansion Units 
and Expansion I/O Units: 1 max.
Not 
supported.
Max. number of I/O 
points
180 (60 built 
in + 40 per 
Expansion 
(I/O) Unit 
× 3 Units)
160 (40 built 
in + 40 per 
Expansion 
(I/O) Unit 
× 3 Units)
150 (30 built 
in + 40 per 
Expansion 
(I/O) Unit 
× 3 Units)
60 (20 built 
in + 40 per 
Expansion 
(I/O) Unit 
× 1 Unit)
54 (14 built 
in + 40 per 
Expansion 
(I/O) Unit 
× 1 Unit)
10 (10 built 
in)
Interrupt inputs 6 inputs (Response time: 0.3 ms) 4 inputs 
(Response 
time: 0.3 ms)
2 inputs 
(Response 
time: 0.3 ms)
Interrupt inputs 
counter mode
6 inputs (Response frequency: 5 kHz max. for all interrupt 
inputs), 16 bits 
Up or down counters
4 inputs 
(Response 
frequency: 
5 kHz max. 
for all 
interrupt 
inputs), 16 
bits Up or 
down 
counters
2 inputs 
(Response 
frequency: 
5 kHz max. 
for all 
interrupt 
inputs), 16 
bits Up or 
down 
counters
Quick-response inputs 6 points (Min. input pulse width: 50 μs max.) 4 points (Min. 
input pulse 
width: 50 μs 
max.)
2 points (Min.
input pulse 
width: 50 μs 
max.)
Scheduled interrupts 1
High-speed counters 4 inputs/2 axes (24 VDC): 
Differential phases (4x), 50 kHz 
Single-phase (pulse plus direction, up/down, increment), 100 kHz 
Value range: 32 bits, Linear mode or ring mode 
Interrupts: Target value comparison or range comparison
Pulse 
outputs 
(models 
with 
transistor 
outputs 
only)
Pulse 
outputs
Trapezoidal or S-curve acceleration and deceleration (Duty ratio: 50% fixed) 
2 outputs, 1 Hz to 100 kHz (CCW/CW or pulse plus direction)
PWM 
outputs
Duty ratio: 0.0% to 100.0% (specified in increments of 0.1% or 1%) 
2 outputs, 0.1 to 6553.5 Hz or 1 to 32,800 Hz (Accuracy: +1%/0% at 0.1 Hz to 10,000 Hz and 
+5%/0% at 10,000 Hz to 32,800 Hz)
Analog control 1 (Setting range: 0 to 255)
Analog input 1 input (Resolution: 1/256, Input range: 0 to 10 V). Not isolated.
 
 
  •  
HOTLINE
   
     Line QR Code